教育经历：

2002.09-2006.07     北华大学，12博BET官方网站，学士

2006.09-2008.07     哈尔滨工业大学， 机电工程学院，硕士

2008.09-2012.06     清华大学，汽车工程系，博士

2010.08-2011.08      美国密歇根大学，交通研究所，联合培养博士生 

工作经历:

2012.08-2014.09   中国商飞北京民用飞机技术研究中心/清华大学，博士后

2014.09-2022.03   北京交通大学机电学院，讲师、硕导、副教授、博导

2022.04-现在    a12博BET官方网站，特聘教授、教授、博导

代表性论著:

[1]. Zhigang Li*, Yang Peng, Haifeng Yang, et al. Simulation and experimental studies of debris penetrating skull. Journal of Biomechanics, 2023, 151: 111551 (SCI)

[2]. Rui Li, Zhigang Li*, Huiqing Lan* et al. Study on the head and neck injury risk impacted by UAV: effect of impact velocity, angle, location, and mass. International Journal of Crashworthiness, 2023. (SCI)

[3]. Jiaming Wang, Zhigang Li*，Huiqing Lan* et al. Study of the head and neck injury risk under impact conditions of the light UAV with a medium weight. Archives of Civil and Mechanical Engineering (2023) 23:226 (SCI)

[4]. Zhongqing Su, Dapeng Li, Rui Li, Guangliang Wang, Lang Liu, Yafeng Wang, Yazhou Guo, Zhigang Li*. Development and global validation of a 1-week-old piglet head finite element model for impact simulations. Chinese Journal of Traumatology, 2023, 26(03): 147-154. (EI)

[5]. 王佳铭, 谭跃东, 靳智慧, 闫莉莹, 纪程, 李志刚*, 邵特立. 泡沫铝压缩试验及等效仿真模型研究. 西南交通大学学报, 2023, 58(1): 91-99, 116 (EI)

[6]. 李睿、李志刚*、李文杰等. 正面碰撞中汽车儿童约束系统模型的建立及改进. 汽车工程学报, 2023,13(6):781-790

[7]. Zhigang Li*, Haifeng Yang, Jianguang Liu et al. An improved yield criterion characterizing the anisotropic and tension-compression asymmetric behavior of magnesium alloy. Journal of Magnesium and Alloys, 2022, 10(2): 569-584. (SCI)

[8]. Zhigang Li*, Rui Li, Haipeng Zhang. Development of a school bus restraint system model and its application in the evaluation of designed protective strategies on child neck injury in front-end crash. International Journal of Crashworthiness, 2022, 27(3): 847-856. (SCI)

[9]. Zhigang Li*, Rui Li, Cheng Ji, et al. Development of a Modified Gurson–Tvergaard–Needleman Damage Model Characterizing the Strain-Rate-Dependent Behavior of 6061-T5 Aluminum Alloy. Journal of Materials Engineering and Performance, 2022, 31(9): 7662-7672. (SCI)

[10]. Zhigang Li*, Ziqiang Pang Jinlong Qiu, et al. Quantification and statistical analysis on the cranial vault morphology for Chinese children 3–10 years old. Computer Methods and Programs in Biomedicine, 2022, 215: 106591. (SCI)

[11]. 王佳铭, 李志刚*, 梁方正等. 面向直升机抗坠毁的新型夹心八边形蜂窝的设计、仿真和理论研究, 航空学报, 2022, 43 (5):225244 (EI)

[12]. 李志刚*, 宿仲情, 王家伟, 等. 用于儿童头部损伤生物力学研究的碰撞理论模型建立及验证. 中国公路学报, 2022, 35(10): 290-298 (EI)

[13]. Zhigang Li*, Zhilong Chen, Yuedong Tan et al. Estimation of a statistical geometric model for the cervical vertebrae of children aged 10–18 years. Medical Engineering and Physics, 2021, 94:41–50 (SCI)

[14]. 廖就, 李志刚*, 梁方正, 王佳铭等. 高共面/异面抗冲击承载能力的新型蜂窝设计及吸能评估, 爆炸与冲击, 2021, 41(8): 083103. (EI)

[15]. 王金金; 李志刚*; 杨海峰; 刘富. 光学玻璃材料动态冲击试验与鸟撞研究, 振动与冲击, 2021,40(7): 216-221. (EI)

[16]. Zhigang Li*, Jinjin Wang, Haifeng Yang et al. A Modified Johnson–Cook Constitutive Model for Characterizing the Hardening Behavior of Typical Magnesium Alloys under Tension at Different Strain Rates: Experiment and Simulation. Journal of Materials Engineering and Performance, 2020, 29: 319-8330 (SCI)

[17]. Cheng Ji, Zhigang Li*, Jianguang Liu. Development of an improved MMC-based fracture criterion characterizing the anisotropic and strain rate-dependent behavior of 6061-T5 aluminum alloy. Mechanics of Materials, 2020, 150. 103598 (SCI)

[18]. Zhigang Li*, Cheng Ji, Dapeng Li et al. A comprehensive study on the mechanical properties of different regions of 8-week-old pediatric porcine brain under tension, shear, and compression at various strain rates. Journal of Biomechanics, 2020, 98: 109380 (SCI)

[19]. Zhigang Li*, Jinjin Wang, Guanghui Song et al. Anisotropic and strain rate-dependent mechanical properties and constitutive modeling of the cancellous bone from piglet cervical vertebrae. Computer Methods and Programs in Biomedicine, 2020, 188: 105279 (SCI)

[20]. Zhigang Li*, Guanghui Song, Zhongqing Su et al. Development, validation, and application of ligamentous cervical spinal segment C6-C7 of a six-year-old child and an adult. Computer Methods and Programs in Biomedicine, 2020, 183:1-11 (SCI)

[21]. Zhigang Li*, Jian Wang, Jiawei Wang et al. Experimental and numerical study on the mechanical properties of cortical and spongy cranial bone of 8-week-old porcines at different strain rates. Biomechanics and Modeling in Mechanobiology, 2020, 19: 97-1808. (SCI)

[22]. Zhigang Li*, Haifeng Yang, Jianguang Liu. Comparative study on yield behavior and non-associated yield criteria of AZ31B and ZK61M magnesium alloys. Materials Science & Engineering A, 2019, 759: 329-345. (SCI)

[23]. Zhigang Li*, Guangliang Wang, Cheng Ji et al. Characterization of the mechanical properties for cranial bones of 8-week-old piglets: the effect of strain rate and region. Biomechanics and Modeling in Mechanobiology, 2019, 18(6):1697-1707 (SCI)

[24]. Zhigang Li*, Haifeng Yang, Guangliang Wang et al. Compressive Properties and Constitutive Modeling of Different Regions of 8-week-old Pediatric Porcine Brain under Large Strain and Wide Strain Rates. Journal of the Mechanical Behavior of Biomedical Materials, 2019, 89:122-131. (SCI)

[25]. Zhigang Li*, Haifeng Yang, Zhaosheng Zhang et al. Crashworthiness of extruded magnesium thin-walled square tubes. Transactions of Nonferrous Metals Society of China, 2019, 29:1223-1232. (SCI)

[26]. 杜汉斌，杨海峰，胡峥楠，肖海涛，宋叶红，杨 震，李志刚*. 车用6061-T5 铝合金的力学特性及各向异性硬化行为的屈服准则. 中国有色金属学报, 2019, 29 (3):439-448. (EI)

[27]. 宋光辉，王广亮，李大鹏，韩晓强，李志刚*. 人体C67颈椎段的建模和验证及不同碰撞工况下的韧带损伤分析. 汽车工程, 2019, 41(10):1172-1178. (EI)

[28]. Zhigang Li*, Haifeng Yang, Xiongwei Hu et al. Experimental study on the crush behavior and energy-absorption ability of circular magnesium thin-walled tubes and the comparison with aluminum tubes. Engineering Structures, 2018, 164: 1-13. (SCI)

[29]. Zhigang Li*, Xiaoqiang Han, Cheng Ji et al. Construction of a Statistical Cervical Vertebrae Geometric Model for Children 3-10 Years Old, Annals of Biomedical Engineering, 2018: 1816-1829. (SCI)

[30]. Zhigang Li*, Cheng Ji, Lishu Wang. Development of a child head analytical dynamic model considering cranial nonuniform thickness and curvature-Applying to children aged 0-1 years old. Computer Methods & Programs in Biomedicine, 2018, 161: 181-189 (SCI)

[31]. Zhigang Li*, Rongxin Feng, Yan Wang, et al. Experimental study on the effect of dents induced by impact on the fatigue life of 2024-T3 aluminum alloy plate. Engineering Structures, 2017, 137: 236–244. (SCI)

[32]. Zhigang Li*, Xiaoqiang Han, Hao Ge, et al. A semi-automatic method of generating subject-specific pediatric head finite element models for impact dynamic responses to head injury. Journal of the Mechanical Behavior of Biomedical Materials, 2016, 60:557-567. (SCI)

[33]. Zhigang Li, Dingni Zhang, Chunlei Peng, et al. The effect of local dents on the residual ultimate strength of 2024-T3 aluminum alloy plate used in aircraft under axial tension tests. Engineering Failure Analysis, 2015, 48:21-29. (SCI)

[34]. Zhigang Li, Weiguo Liu, Jinhuan Zhang, et al. Prediction of skull fracture risk for children 0–9 months old through validated parametric finite element model and cadaver test reconstruction. International Journal of Legal Medicine,2015,129(5):1055-1066. (SCI)

[35]. Zhigang Li, Byoung-Keon Park, Weiguo Liu, et al. A statistical skull geometry model for children 0-3 years old. PloS one, 2015, 10(5): e0127322. (SCI)

[36]. Jielong Wang, Zhigang Li. Implementation of HHT algorithm for numerical integration of multibody dynamics with holonomic constraints. Nonlinear Dynamics, 2015, 80(1-2): 817-825. (SCI)

[37]. 葛昊, 李志刚, 刘卫国 等. 0-3岁儿童颅骨轮廓形态统计分析, 汽车工程, 2015, 37(3):290-299. (EI)

[38]. Zhigang Li*, Hao Ge, Jinhuan Zhang, et al. The necessity of evaluating child neck injury in frontal collision of school bus for transportation safety. Safety Science, 2014, 62:441-449. (SCI)

[39]. Zhigang Li, Mingyi Zhang, Fu Liu, et al. Influence of dent on residual ultimate strength of 2024-T3 aluminum alloy plate under axial compression. Transactions of Nonferrous Metals Society of China,2014,24: 3084-3094. (SCI)

[40]. 谢灿军, 童明波, 刘富, 李志刚 等. 7075-T6 铝合金动态力学试验及本构模型研究. 振动与冲击, 2014, 33(18): 110-114. (EI)

[41]. Zhigang Li, Xiao Luo, Jinhuan Zhang. Development/Global validation of a 6-month-old pediatric head finite element model and application in investigation of drop-induced infant head injury. Computer Methods and Programs in Biomedicine, 2013, 112(3):309-319. (SCI)

[42]. Zhigang Li, Jinhuan Zhang, Jingwen Hu. Surface material effects on fall-induced pediatric head injuries: a combined approach of testing, modeling, and optimization. International Journal of Crashworthiness, 2013, 18(4): 371-384. (SCI)

[43]. 茹嘉良，李志刚，赖庆鑫 等. 某抗冲椅冲击响应计算及试验分析.噪声与振动控制, 2013, 33 (2): 40-43.

[44]. Zhigang Li, Jinhuan Zhang, Long Xin, et al. A computational investigation on the effect of vehicle rotation on driver injury risks in frontal offset crash. International Journal of Vehicle Safety, 2012, 6(1):61-76. (EI)

[45]. Zhigang Li, Jinhuan Zhang, Chunsheng Ma. Development of an occupant restraint system model and parametric study on equivalent crash pulse in vehicle frontal offset crash, Journal of Beijing Institute of Technology, 2012, 21(2): 203-209. (EI)

[46]. Zhiang Li, Jingwen Hu, Jinhuan Zhang. Comparison of different radial basis functions in developing subject-specific infant head finite element model for injury biomechanics study, ASME 2012 Summer Bioengineering Conference, 2012. (EI)

[47]. 李志刚, 胡敬文, 张金换 等. 基于统计学的参数化儿童头部有限元模型的建立及碰撞事故再现.清华大学学报(自然科学版), 2012, 11:1631-1637. (EI)

[48]. 茹嘉良, 杨欣，李志刚，张金换. 中美校车标准对比分析及座椅动态试验研究. 中国汽车安全技术国际学术会议暨中国汽车工程学会汽车安全技术学术会议. 2012.

[49]. Zhigang Li, Jingwen Hu, Matthew P. Reed, et al. Development, validation, and application of a parametric pediatric head finite element model for impact simulations, Annals of Biomedical Engineering, 2011, 39(12): 2984-2997. (SCI)

[50]. Zhigang Li, Jinhuan Zhang, Qingxin Lai et al. Development and optimization of a new occupant restraint system for improving mini vehicle safety, First International Conference on Transportation Information and Safety, 2011. (EI)

[51]. Zhigang Li, Jingwen Hu, Jinhuan Zhang. Age Effects on Material Properties of Pediatric Skull: A Literature Review of Experimental Tests. 2011 China International Conference of Automotive Safety Technology. 2011

[52]. Zhigang Li, Jinhuan Zhang, Qingxin Lai, et al. The Application of Prescribed Structural Motion Method on the Simulation of Vehicle Side Impact Based on MADYMO. 2011 China International Conference of Automotive Safety Technology. 2011

[53]. 张金换，李志刚，胡敬文 等. 汽车儿童安全保护的欧美法规对比及未来研究方向. 汽车安全与节能学报, 2011, 2(3):185-191.

[54]. Zhigang Li, Jinhuan Zhang, Chunsheng Ma et al. Numerical study on neck injury characteristics under different posture in automotive side impact, Journal of Beijing Institute of Technology, 2010, 19(3): 318-323. (EI)

[55]. 高海波, 李志刚, 邓宗全. 基于ANSYS的杯形柔轮结构参数对柔轮应力的敏感度分析, 机械工程学报, 2010, 46(5): 1-7. (EI)

[56]. 李志刚, 沈明, 邹猛 等. 基于多体动力学的微型客车急转弯侧翻倾向性仿真, 清华大学学报(自然科学版), 2010,50(08): 1286-1289. (EI)

[57]. 李志刚, 张金换, 马春生 等. 汽车转向机构安全性仿真分析及试验研究, 清华大学学报(自然科学版), 2010, 50(05): 649-653. (EI)

[58]. 李志刚,张金换,马春生,等. 某微型轿车正面碰撞约束系统建模及影响因素分析. 2009中国汽车安全技术国际学术会议暨中国汽车工程学会第十二届汽车安全技术年会论文集. 2009.

主要科研项目：

[1].中国博士后科学基金面上资助项目（纵向，主持，已结题）

[2].中国博士后科学基金特别资助项目（纵向，主持，已结题）

[3].中央高校基本科研业务费项目（纵向，主持，已结题）

[4].航空科学基金项目（纵向，主持，已结题）

[5].国家自然科学基金青年项目（纵向，主持，已结题）

[6].国家高技术863（纵向，参加，已结题）

[7].中央高校基本科研业务费项目（纵向，主持，已结题）

[8].航空科学基金重点项目-课题（纵向，主持，已结题）

[9].装备预研教育部联合基金（青年人才）（纵向，主持，已结题）

[10].国家自然科学基金面上项目（纵向，主持，已结题）

[11].工信部民用飞机专项科研项目子课题（纵向，主持，已结题）

[12].航空科学基金重点项目-课题（纵向，主持，已结题）

[13].兵器工业中国北方车辆研究所委托项目（横向，主持，已结题）

[14].兵器工业安全技术研究所委托项目（横向，主持，已结题）

[15].中航工业中国飞机强度研究所委托项目（横向，主持，已结题）

[16].中航工业航宇救生装备有限公司委托项目（横向，主持，已结题）

[17].中国商飞上海飞机设计研究院委托项目（横向，主持，已结题）

[18].中国电子科技集团公司第十一研究所委托项目（横向，主持，已结题）

[19].中国电子科技集团公司第十一研究所委托项目（横向，主持，已结题）

[20].北京航天自动控制研究所（横向，参加，已结题）

[21].吉利汽车研究院委托项目（横向，主持，已结题）

[22].交控技术装备有限公司委托项目（横向，主持，已结题）

[23].乾行达科技有限公司委托项目（横向，主持，已结题）

[24].江苏铁锚公司委托项目（横向，主持，已结题）

[25].国家自然科学基金面上项目（纵向，主持，在研）

[26].GF科技基础加强计划技术领域基金（纵向，主持，在研）

[27].工信部民用飞机专项科研项目（纵向，参研部分负责人，在研）

[28].北京市自然科学基金-丰台轨道交通前沿研究联合基金（纵向，主持，在研）

[29].北京市自然科学基金“海淀原始创新联合基金”（纵向，主持，在研）

[30].国家重点研发计划（纵向，参加，在研）

[31].中航工业综合技术研究所（横向，主持，在研）

[32].中国铁道科学研究院集团有限公司委托项目（横向，主持，在研）

成果与荣誉：

主持国家自然科学基金项目(3项)、北京市自然科学基金联合基金（2项）、装备预研教育部联合基金（青年人才）、GF科技基础加强计划技术领域基金、民用飞机专项科研项目子课题、航空科学基金、军工研究所和企事业单位委托等科研项目30余项。在领域内的Top和主流期刊及会议上发表论文60多篇，被SCI检索30多篇，EI检索20多篇，论文在google学术中被引用700多次，2篇代表性论文均被引用100多次。申请发明专利20多项，以第一发明人授权发明专利19项。以主要编制人编写国际/国家/行业标准4项（已颁布3项）。获中国航空工业集团有限公司科学技术二等将（2/12）、北京汽车工程学会优秀论文奖，航空科学基金优秀结题项目、Mimics Innovation Award–Best article award、校青年教师教学基本功比赛二等奖、优秀研究生指导教师等奖励。担任国家自然科学基金同行评议人、30多个国内外期刊和会议的审稿人。指导的员工多人获校优秀硕士论文、校级优秀毕业生、北京市优秀毕业生、国家奖学金等荣誉。